The Two-Station pneumatic Rotary Table, made to fit the thermal assembly units can significantly reduce cycle times. The table automatically rotates 180 degrees each time the palm buttons are pressed, bringing the opposite nest under the head. Once the thermal
head comes down, the operator can release the palm buttons, remove the finished part and load a new part while assembly is taking place. The rotary table can achieve speeds almost equal to 4, 6 or 8 station dial tables, yet with only two nests required, it is more economical to tool. This rotary table is considered a custom option and should be ordered at the time that you purchase your thermal machine. The shot pin locator and the two nests required for operation are not included but can be quoted separately. Installation on an existing thermal unit can also be quoted separately.

 

Features:

- Accurate assembly using shot pin location

- Adjustable stops with rubber cushion
- Flow controls on cylinder
- All adjustments in one location
- Low torque for safety

Specifications:
Pneumatic requirements: Clean, dry air @ 60 psig
Piston diameter: 21mm
Weight: 20 lbs
Port size: 1/8 npt
Custom Options:

Circular table tops allow mounting of two nest sets for quick tooling changes between similar parts. Unbolt table top, rotate to new nest set, bolt and begin.
Larger tables customized for large parts.

Part Numbers:

BY107 - Two-Station Pneumatic Rotary Table

 

 

 

Manual Rotary Table
The Manual Rotary Table, made to fit the thermal assembly units is an economical solution to reducing cycle times. The table manually rotates 180 degrees each time the operator rotates the handle, bringing the opposite nest under the head. Once the thermal head comes down, the operator can release the palm buttons, remove the finished part and load a new part while assembly is taking place.This rotary table is considered a custom option and should be ordered at the time that you purchase your thermal machine.

 

Features:

Durable handle
Heavyduty bearing constuction
Specifications:
Weight: 18 lbs

Part Numbers:

BY115 - Manual Rotary Table