The pneumatically-operated, bench top system develops 1/2 ton of down force and is ideal as a single point unit for large, insert or staking operations. As a stand-alone unit it is a natural for secondary operations at a molding press or assembly line. The unit has a screw adjustment to easily raise or lower the head (from 7-1/2" to 19-1/2").

 

Features:

- Easily adjustable head
- Adjustable mechanical stop for accurate tool adjustment
- A microprocessor-based digital display controller for accurate temperature regulation
- Dual ram speed for decreased cycle time
- Digital readout, dwell timer for repeatable process control
- Thermal probe with built-in thermocouple
- 6" x 6" platen for upper tooling
- 80-999 degree F. operating range +/-2 degree accuracy
- Dual, anti-tiedown, no-touch ergonomic actuation
- Adjustable shock absorber for controlling tooling advance
- Emergency stop; non-asbestos insulator; flow controls for adjustable stroke speeds; air filter regulator; base with fixture mounting holes

 

Specifications:
Power requirements: 110 VAC, 50/60 Hz
Current draw @ full rated output: 10 amps
Pneumatic requirements: Clean, dry air @ 100 psig
Maximum Force: 1,200 lbs @ 100 psig
Stroke length: 4" (10.16 cm)
Weight: 320 lbs

Custom Options:

Manual or Pneumatic Slide Table
Modular units without base or column for automation applications
Rotary turntables and additional automation available
Post cooling system
Part Hold Down Plungers
One additional zone

 

Part Numbers:

BY081 - Adjustable 2030 Unit