Why Choose Thermal To Assembly Your Parts?

- Thermal machines cost less.

- Thermal tooling usually costs less and lasts longer.

- Thermal units are extremely quiet.

- Thermal welds are 20% stronger.

- Inserting into filled material can be accomplished with less damage to the inserts with a thermal unit.

 

- Multiple stakes and inserts at different levels can be accomplished simultaneously with a thermal unit.

- Different sized inserts can be driven simultaneously with a thermal unit.

- Larger inserts or more inserts can be driven with one cycle
of a thermal press than with an ultrasonic press.

- Thermal units work well on glass and mineral-filled resins.

- There is less damage or marking on the face of a molded part with a thermal unit.

- There is less mechanical force and therefore less stress on the part with a thermal unit.

- The thermal staking process is less likely to split the boss or damage other components.

- Thermal Assembly is very quiet compared to ultrasonic assembly.

- Thermal machine have very low maintenance cost.

- Reported to have 10% to 20% stronger holding retention for stakes and inserts.

- There are much fewer material limitations with the thermal assembly process