These hot knife Thermocutters feature an electrically (110V)
heated blade designed for cutting all thermoplastics
easily and effortlessly. Heats up instantly. Transformer
steps voltage down to a safe level. Cuts through material
up to 5 inches thick.
This hot knife Thermocutter is designed for continuous, industrial operation - including on-off batch production, use at a central work station or on-site.

The Zetz-24 can be set for on/off operation or continuous use with the flip of a switch.

The cutting handle is connected to the base unit by a 91/2 foot long 3-line electrical cable. Two lines are for AC power. The on/off switch in the handle electronically actuates the controller in the base unit on the third line using very little power. This 3-line cable design decreases temperature buildup in the handle.

Blades are changed quickly and easily. Temperature of the blade is adjusted by the variable controller on the base unit. This ensures that the blade is evenly heated to the temperature suitable for the application. For automatic operations requiring the cutting blade to be built in.

 

500 WATTS - 115 VOLTS
Designed for continuous heavy duty industrial use

Infinitely adjustable controller/transformer

Handle is only 1.2 pounds

Up to 2.6 Volts on blade makes for safe operation

Cables - power to controller - 6 feet controller
to handle - 91/2 feet

Blade temperatures 220°F to 1400°F depending on
blade used

Comes with one T-08/75 mm blade (suitable for
foam and soft thermoplastics)

Optional handle for robotic use INCLUDED

Control Unit Dimensions - 71/2" x 81/2" x 117/8"

Weight - 30 lbs

Also available in 240-Volt - no extra charge -
specify when ordering.

APPLICATIONS:

Manufacturers of molded die cast and extruded parts,
foam plastics, raw-,semi-, and finished thermoplastics
Electrical installation
Building construction
Insulation, internal finish and facing
Cyrel printing plates
Fiber Optic Cables
Furniture makers
Fabric
Manufacturers of doors and windows
Window glazings

Interior decorating
Upholstery and carpeting
Switch and distribution boards
Control systems
Wire Stripping
Telephone and weak-current installations
Refrigeration trucks
Packaging
Laboratories and research

 

EASILY CUTS: Rubber PVC Polyethylene Polypropylene ABS (Acrylo-Nitrile Butadiene Styrene) Polystyrene Polyamide Fiber Board Styrofoam

USE WITH: Sheet Stocks Cable Conduit Die-Cast Parts Molding Sprues Cleaning Molds Flashing Foamed Plastics